Hi, I have a bath tub in my apartment that is draining very slowly.
It does finally drain but only after about 12-15+ minutes.
After trying all the old remedies (fluids, powders, zip-it) I am now thinking about manually snaking the drain pipe.... But a Handyman guy who lives at my apartment...
How do i replace the quarter turn cartridge on this cooke & lewis ricci bath mixer tap .
Normally there is a grub screw somewhere to take the handle off, but for the life of me i cannot find one on this mixer.
Any helpful suggestions would be greatfully received.
Hello,
I'm wondering if you can help me.
I have an insurance company who is trying to get me to make my plumber re-quote for work to replace a broken bath. He's included a bath panel with the quote as it's the type of bath that requires a panel (and the original style is not available so can't...
Hi, I have a few issues with my bath drainage and leaking. The first issue is that the near corner of the bath by the taps is sloped downwards meaning that it pools in the corner and quickly starts leaking through gaps in the shower screen onto the floor rather than into the bath. The rest of...
I have read of hot water cylinders being heated with a dual element immersion heater. The main principle being that a shorter element heats the top of the tank and then, subsequently, a longer element comes into play. With a bath/sink switch the longer element may be disabled. The topic of such...
Hi all
Do any of you guys use a silicone to seal between the bath and waste rubber underneath?
The bath is only a cheap one and the bottom of the waste opening isn’t flat, which seems to leave an opening enabling water to leak out.
I used silicone in the past for this very problem but I was...
I have a traditional style bath tap with shower attachment via a diverter. The lever no longer moves, and so I managed to unscrew the lever arm and the brass (colonial) piece, exposing the plastic diverter valve. Unfortunately, I am stumped as to how to get access to the diverter valve, as the...
Good morning! First post looking for advice on an issue I am having with a bath installation. Although I have installed many baths before, mainly using perimeter battens for support, I am attempting to install a fancy whirlpool/jacuzzi bath for my son. Plumbing and electrics are sorted but my...
Good morning,
I have a hinged shower screen for my bath that I don't have fixings for.
The guide holes in the screen line up with guide holes in the frame - but the holes in the frame are horizontal slots, presumably so that I can adjust the shower screen for a not-quite-vertical wall.
However...
Hi all,
My partner and I recently bought a house and have been attempting to make the bathroom less fugly. I was removing the bath and shower taps to replace, but while removing the bath spout (which had no nut to undo), the threaded section of the pipe broke. I thought the bit that broke must...
Afternoon, our bath waste pipe in our rented property has started leaking slightly when we shower. We've narrowed it down to a loose screw in the centre of the plughole. My understanding is that this screw being loose means that water is able to leak out between the bath waste and the waste...
hi all,
I'm just sorting the drainage for my freestanding bath. Due to a slight misalignment of the drainage / manufacturing error I'm unable to get the rubber seal for the overflow totally compressed up against the bath.
Any recommendations on an alternative to the rubber gasket like Plumbers...
Hi guys I'm wanting to install an electric shower in my new property what's the easiest way to check it bath tap is coming from mains ?
The mains stop tap is located near the toilet in the room underneath me, when I switch that off it shuts all cold water off for every tap in the house.
If I...
Hi, just hoping someone can advise on best option to connect 40mm waste pipe to a flexible bath waste hose of approx 30mm, I assume some form a spigot to will needed but not sure exactly what to search for.
Many thanks in advance!
Hi Folks, I want to connect a bath waste outlet to a hose, but I'm struggling to configure it. It's for a temporary rainwater collection system that's being installed on a remote farm. I need to get from the plughole to a connector that will fit a hose. But I keep drawing a blank, but I'm...
Firstly, I already have a fair idea of what I need to do to fix the problem (I hope plunging will fix it, I just need to buy one), I would just like to know what sort of thing can suddenly obstruct the pipe that my bath drains to.
The problem...
Normally someone can have a bath and then pull...
Hoping someone can help. I have the bath tap as shown in the picture. I need to get the bit that sticks out (little round handle) off. The tap doesn't turn off properly as it ends up turning all the way to the wall. To get it off I basically have to pull the whole thing forward and push the tap...
I've got a leak at the connector next to the p trap under my bath at point 1. on my attached photo.
I unscrewed it and pipe A hardly goes into pipe B - it's almost flush with the start of B. Assume the rubber seal (can't spell) has failed - there's not much chance of water passing through...