burner | Page 2

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

burner

Recent contents Top users
  1. R

    problem with oil burner riello

    Hello. I have a problem with the oil boiler. After the summer season, he doesn't want to work normally. It started with blasting electric fuses. After looking inside, I saw condensation. Then it stopped working with the lid closed at the front. When the lid was open it worked. And since...
  2. M

    Rayburn 499k cooker burner blows out

    I have a 499k rayburn with a balanced flue. When we turn the cooker side on it works for a while OK, it could be OK for a few weeks then it will blow out and the kitchen smells of kerosene. If we try and restart it it won't come back on for a while. But then we just press the restart button and...
  3. A

    Looking to buy a log burner and have it connected to boiler

    Evening everyone I’m not sure if this is the place to post but was hoping for some help I’m looking to buy a log burner and have it plumbed into my central heating system to provide hot water to my house. I have no idea what I’m doing so a asking for recommendations of someone that ca do it...
    • Adam Pocock
    • Thread
    • boiler burner
    • Replies: 3
    • Forum: Boilers
  4. A

    Control box 569 Riello Thermital Burner fails to fire

    Why does the Control Box 569 for riello thermital supereffe 25 not fire?
  5. M

    Confusion understanding Burner manual specifications (electrodes gaps)

    Hello I've recently come across a Sterling Bentone burner manual online which is for my 2001 burner and I intend to use it to check my electrode gaps. The manual illustrates this information however it states multiple measurements and has me a little confused. For gap between electrodes it...
  6. J

    Oil burner boiler riello burner rdb HELP

    Hello alll, I have a firebird combi oil burner with the riello burner rdb in. It was working perfect up untill yesterday where it's going straight into instant lockout and won't do anything. Not fuel related because I can see it squiring out. Any guesses to what it could be ? Thank you
  7. gavdtra

    Thermostat on burner low but temp indivator much higher

    This thermoastat is much higher than the dial says. Correct.me if I'm wring but that doesn't seem right... It's been like that for days so it's not like I've just turned it down...
  8. J

    Zone valves & burner light?

    Hi all, For my boiler worcester bosch greenstar 30Kw Ri Compact, I noticed that, within programmer set time, for heating, if the house temperature has reached set temperature say19°C, the zone valve for heating will close, the boiler's a burner light (green) will be off, and blue light is off...
  9. Lockiedox

    Rayburn twin burner not working

    Hi all, I have a rayburn twin burner and it ran out of fuel while the heating was on a few weeks ago. Refilled the fuel and attempted to bleed it (very little came out) but it keeps tripping and the reset button doesnt help. The cooker side of it is working. Anyone offer some advice on whats wrong?
  10. J

    Worcester grecnstar burner seal (servicing)

    Hi all, Just curious - how often do you all replace the burner seal on a Worcester Greenstar during servicing? Assuming all is well with combustion levels, pressure test, etc. (As without X-ray vision, one obviously can't see the state of it until you take it apart). Thanks everyone, Jennie
  11. J

    Oil Burner nozzle capacities

    What is the significance of the kg/hr stamped on danfoss nozzles, I have a 0.6 usgpm nozzle fitted in my 20/26kw Firebird SE boiler. 0.6 usgpm is 2.27LPH and my boiler output of 20kw at 84% efficiency reflects this more or less. 2.27 LPH = 1.79 kgs/hr (see table) at a kerosene SG of 0.79, there...
  12. S

    log Burner Heat exchange?

    Hi all. Does anyone know of a small water heat system that I can attach directly to the back of my log burner, in my living room, that can conduct the heat (by contact) of the log burner and flow the hot water to a panel radiator in another room (e.g. conservatory)? I only want a very simple...
  13. gavdownie

    Fumes and Water under burner

    So the building is filling up with fumes, there's water coming from beneath the burner and there's a 7mm hole in the flue. I'm thinking the flue might be blocked and that's is causing water vapour to condense and come out the bottoms of the burner...? And the hole in the flue needs fixed Any...
  14. gavdownie

    Oil burner too hot

    Eighty degrees is a winter setting to my mind. Am thinking I should turn this dial down to four or so as the building is roasting?
  15. P

    Hi guys I am in need of some help, I have a 24 year old Boulter 50/70 utility oil boiler (camray) with a Riello 40 burner.

    The boiler has just been serviced and lots of new parts fitted, On firing up all works fine for approx 15 seconds then the flame cuts out but the motor keeps running, after approx 10 seconds the flame fires up again for 15 seconds and the same thing happens. If I remove the front door/cover of...
  16. G

    Worcester combi 25Si burner light out

    Hi all. was wondering if anyone knew why my hot water is not working on Worcester Greenstar 25Si . sequence of events: I removed a radiator for decorating , shutting of valves etc then repressurised the boiler back up to 1.5. All seemed to be working . I turned off water overnight. Next day I...
  17. C

    Oil burner randomly turns on

    Hi my oil burner has started to turn on randomly. It doesn't heat anything but I can hear it running outside. What could be causing this.? The timer is set to off
  18. B

    Hello. I worked on an oil boiler that when the outside door is closed the burner goes to lockout. When it is opened slightly it works perfectly. Ha

    Hello. I worked on an oil boiler that when the outside door is closed the burner goes to lockout. When it is opened slightly it works perfectly. Has been working fine in same situation for 20 years. I replaced the gasket at the burner and replaced the fire board on heat exchanger access door...
  19. S

    Installing a Pellet Burner with Gas Boiler as Backup

    I'm an end user with limited knowledge of plumbing and just trying to get an understanding of options available to me. We currently have a Valiant Combi Boiler Sealed Unvented Heating system. It was installed 3 years ago and works perfectly well for both CH & HW. Recently we built an...
    • stepto
    • Thread
    • boiler burner gas engineer
    • Replies: 0
    • Forum: Boilers
  20. F

    240v to burner...no igntion

    At a warmflow bluebird today not firing.I checked there was 240v going into the rdb control which there was so immediately got a control from the van but no dice same issue.So im getting 240v on my meter but no lockout light .Nothing completely dead.I plugged a mains powered grinder into the...
Back
Top