burner | Page 4

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

burner

Recent contents Top users
  1. M

    Checking burner pressures with analyser/manometer?

    As the title really folks. Who uses what to check pressures and carrying out tightness tests? I’m not to keen with the analysers to be honest. I was checking a burner pressure recently and with the analyser it was fluctuating up and down but with the u gauge it was solid?
  2. M

    Flashing burner light on vortex pro combi 26e

    Anybody know what the flashing burner light means? Tried to find any fault codes can't find any. I think the pcb is faulty but want to double check before I fit one.
  3. Inverness

    Trianco tro mk3 what brand is the burner?

    hi guys, I removed a burner from the trianco tro it had 2 screws below the burner to keep it fitted. It had a danfoss pump on the right hand side face on and the control box on the left face, the blast tube above is a case that's opens up and the fan is in side. The fan adjustment is by a flat...
  4. L

    Riello burner reuse..

    We changed our Grant oil combi a while back and I kept the good working burner unit. I now happen to be in need of a workshop heater.. See where I'm going with this? Can I re purpose the Riello for use as a workshop heater using it like a space heater? Love to hear some ideas. Cheers.
  5. SJB060685

    Burner back pressure

    Can someone explain to me how a higher burner back pressure in millibar affects thermal output? I’m training on oil and read a lot of manuals. Riello for example state the firing rates for various burner models and what can be achieved in output terms in relation to burner back pressure, ie a...
  6. Inverness

    Firebird riello rdb burner

    My burner keeps cutting out it will run for maybe an hour or longer then cuts out but when you hit the reset button it starts again and runs no problem for another period of time. I can hear a slight crunchy sound possibly coming from the oil pump..
  7. O

    Boiler - burner - hex cleaning.

    hi lads, I was wondering how you guys clean the burner of Vaillant or viessman boilers? Do you guys use any products to get that cleaned out? I only use water, occasionally cola due to its phosphate... all the other products I know off they aren’t good for cleaning as they are very aggressive...
    • Old Account
    • Thread
    • boiler burner
    • Replies: 32
    • Forum: Boilers
  8. greekengineer

    how often an oil fired burner should be on

    Hello, does anyone of you can give me information with regard to the frequency of an oil burner on - off cycle? For example, how often is permissible for a oil burner to cycle ON - OFF within an hour? Recently I noticed that an oil burner ON - OFF CYCLE was a little bit short ( about 10...
  9. R

    Potterton Statesman system burner..

    Hi I have a problem with a potterton Statesman system boiler. Riello R40 G5. I'm getting lock out after about 15 sec. Motor runs, oil to pump. Although slow bleeding through pump bleeder. No pressure on gauge at all. Previous plumber has changed pump solenoid.. Im suspecting pump or broken...
  10. B

    Grant oil burner set up

    Evening,fitted a few oil boilers,usually Grant. Fitting one just now and noticed that the burner is different. Is there something I need to look out for when setting up?
  11. C

    How to connect 4 burner hob to gas supply

    Not sure if this is the right forum so if not please delete- So I’ve just purchased a gas hob and wondering if I can just use a gas hose to connect it up or does it need to be done by copper pipe work? Any help would be great!
  12. O

    Worcester Danesmoor oil burner.

    Hi guys I was hoping someone could let me know what type of oil burner this is on a worcester danesmoor. I've spoke to worcester and they didn't know. I've looked high and low for any data plate/info with no joy so I've come to the conclusion that it's disappeared with age.
  13. L

    spray booth burner low burner pressure

    Hi, i have been called to an unusual job for our company and was looking for some guidance. The spray booth is being heated by a gas burner fed from L.P.G cylinders. The burner will come on at high heat for a few seconds and then drop to a low burner pressure. I have spoke to the customer who...
  14. plumb_know

    UNVENTED CYLINDER & LOG BURNER

    Hi Everyone, had a customer enquire about installing twin coil unvented cylinder with log burner supplying one coil to make use of heat from burner. I have seen some threads where people say this can be done but would have to be indirectly supplied from thermal store with open vented heating...
  15. J

    Combining a wood burner with lpg boiler - ideas?

    hi, I’m new to the forum. I’m looking for any advice on best way to connect a wood burner with back boiler that will provide heating and hot water when the lpg boiler is switched off, yet if you can’t be bothered burning wood in the wood burner you can switch the lpg boiler on for instance heat...
    • JasonLR
    • Thread
    • boiler burner
    • Replies: 13
    • Forum: Boilers
  16. D

    log burner and gas boiler into thermal store = persistent problem frustrating for me the homeowner

    In 2012 we had a thermal store installed with a log burner and regular gas boiler feeding it. pretty much since then it hasn't worked properly, the original fitter has since retired and a couple of plumbers and an electrician have looked at it but cannot get it to work effectively. The idea...
    • Deleted member 96758
    • Thread
    • boiler burner gas engineer thermal
    • Replies: 1
    • Forum: Boilers
  17. K

    Is gas boiler burner pressure and operating pressure the same thing?

    Hi I was hoping to get some advice from a gas safe engineer who is used to doing landlord checks please. I have a boiler (condensing boiler used for gas central heating only and not for hot water which is by electric immersion) and the last landlord check engineer said it was not safe to use...
    • Krisha1987
    • Thread
    • boiler burner gas engineer pressure
    • Replies: 18
    • Forum: Boilers
  18. Jock Spanners

    Ideal Mexico with noisy burner

    Evening all, I've got an old Ideal Mexico with a really noisy burner. It seems to have flames spilling from the end of the right hand burner making it roar. I suspect the burner cap gasket has perished allowing combustion through the joint. Knowing that it's obsolete I don't want to condemn it...
  19. C

    best replacement burner

    what would be a good burner to replace a sterling 40 st108pl on a eurocal combi balanced flue, would the eogb x 400 do? it comes with a balanced flue conversion kit buts its on the wrong side. don't know if it would fit, any help would be great. thanks
  20. Robert Tyrrell

    Problem getting burner to keep firing

    ok - I'm on holiday at the moment and I can't get to the boiler to try anything at the moment but this is bugging me so I'd like your opinions on probable causes/remedies. Just a few hours before I left for my holiday I got called to a breakdown of a Worcester heatslave because it had started to...
Back
Top