burner | Page 5

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

burner

Recent contents Top users
  1. S

    This is leaking in burner. Is it difficult to fix

    Sister called me saying there's an oil leak in her burner. Called round and took pic of it. Its this part with the very small copper pipe going into it. The oil is dripping from it every sec or so. Can anyone tell me what it is and is it straight forward to fix?
  2. B

    BENTONE B11C Burner not playing ball

    Our old faithful Worcester Heatslave 20/25 Bentone B11C hasgiven up the ghost and no amount of button pressing would encourage it back tolife. Finally traced it back to the pump / motor coupling failing as it wasjust about moving some oil up to the burner head, presumably this was what...
  3. E

    Powermax 1400 boiler - burner not always kicking in

    Apologies for the long post but I'm hoping to get a bit of advice. Last week a plumber came in to replace a bathroom rad with a heated towel rack and remove a rad from downstairs in the hallway. The work seemed fine and our CH and hot water both came on as programmed that night. However the...
    • Enthus
    • Thread
    • boiler burner
    • Replies: 3
    • Forum: Boilers
  4. D

    Wood burner back boiler gravity circuit problem

    Hello all, I have a problem with the gravity circuit on a system with 16kw multi fuel burner with a back boiler. The existing plumbing is about 15 years old, roughly. House was vacant before buying and had an old inset stove that was falling apart, assume it worked fine as it was a housing...
    • Dymock
    • Thread
    • back boiler boiler burner gravity
    • Replies: 20
    • Forum: Boilers
  5. M

    Log burner question

    Hi, Its to do with heating so thought I might get an answer here! I want to fi a log burner in my bungalow, there is an existing fire place and the chimney runs externally - i.e. not through any rooms. I plan to fit it myself if its doable, I plan to get the chimney swept, but am reading...
  6. A

    Selectos D42/A Burner - damaged?

    Hello. I've a Selectos D42/A burner in an Trianco boiler. I've been told that the 'nose' of the burner (fire tube?) is damaged and that I need a new part (unavailable) or a new burner. I've looked on the internet for a photo of a 'good' one without success but I did find a couple of diagrams in...
  7. C

    wood burner boiler

    sitting looking at weather overnight temperature drops and thought - what is the equivalent to a frost thermostat protection on a wood burner boiler. Clearly its damped down over night or even let go out til next day but what stops any sudden drop in temperature affecting a place in any part of...
  8. N

    Burner motor to Oil Pump Vibration

    Hi I've fitter new motor to Inter 2011C burner which drives Danfoss BFP 11L3 oil pump. motor bearings are good fan rotates freely and without wobble. There's a vibration noise from the pump coupling area which I just can't seem to solve. If I slacken the pump mounts and move it slightly noise...
  9. R

    Back burner

    I have a pressurised heating system in my house,wanting to put in a wood burning stove and wondering can I put one in with a back boiler to heat the water only-not radiators? I'm not going to attempt myself but after getting both yes and no answers from plumbers I'm baffled. Help please?
  10. R

    Back burner

    Hi all.i have a pressurised heating system in my house and wondering if I can fit a wood burner with a back boiler that heats our water only-not radiators. Any help greatly appreciated, thanks
  11. Deleted member 32524

    Vokera option no gas through to burner

    Hello. Been at above and have continuity @ overheat stat, sparks then goes to lock out. No gas @ p2. Ta, Duncan
  12. D

    what is the best alternative to eurocal monoflame minor 1 burner

    i am planning to replace my 20 year old trusted oil burner for something more modern. i am unsure if i should install a riello RDB or a bentone/sterling burner ?? i have a boiler house casing, so anything should fit , space-wise. i am worried about blast tube size or if the distance from nozzle...
  13. Robert Tyrrell

    Ideal Classic burner box seal

    I went on a breakdown call yesterday and I had to replace the fan on an Ideal Classic FF250, which I did, but whilst fitting I noticed that the seal on the burner box wasn't complete and I checked it for CO with my FGA. It's giving out 29ppm so I've turned it off and informed the customer, who...
  14. N

    Coal fired back burner boiler leaking

    Hi, I have an old back boiler but it has started leaking at joint. Could someone repair for me please? House is in Bickershaw, near Wigan, Post code WN2 4AB. If you know someone who can repair for me, please let me know.
    • Nijjhar
    • Thread
    • boiler burner leaking
    • Replies: 0
    • Forum: Boilers
  15. W

    Riello RDB burner motor running but not firing - tip

    Had this come up again last week, and just wanted to pass on this tip: If you come to a Riello RDB burner which has the motor running but does not attempt to fire, or takes a long time to fire, it can either be the photocell or the motor. Most often it is the photocell. To test, pull the...
  16. J

    Oil Burner Housing Lock size

    Hi I'm new here so hopefully I have posted this in the correct section. I have oil fired central heating with small galvanized housing outside which houses the boiler and oil burner. The oil delivery man had to bleed the system last time and I lost the key so we forced the door off. I'm looking...
    • JJ800
    • Thread
    • burner size
    • Replies: 3
    • Forum: Boilers
  17. M

    Swirl burner for rothenberg

    What is the jet that comes with the Rothenberg swirl burner nozzle?
  18. A

    Ideal classic 260. sparks, burner lights for split sec on and goes out. repeats.

    Anyone familiar with this boiler and come across something similar before? The tech guys said it must be an external control. I'm not so sure. New fan put in 3 weeks ago. Colleague thinks pcb or gas valve, leaning towards pcb. I have ordered a few different parts so hopefully its one of those.
  19. J

    linking mf burner & gas system

    Im fitting a new heating system to my house Im gas safe registered & plumbed a few multifuel burners, but never mixed the 2 Can I use a low loss header on the mf side to transfer the heat over to the flow on the gas system. I appreciate the need of extra pumps, pipe stats, check valve, its just...
  20. stani

    Log burner

    Does anyone have an idea of the possible manufacturers of this stove?
Back
Top