logic | Page 9

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

logic

  1. Scott_D

    New ideal logic

    Fitted one today Its a bit lighter It looks a bit more 'vogue' It has a vogue style user interface They have made some nice upgrades, I didn't have loads of time to play around with it but it is still s good boiler for the money.
  2. S

    ideal logic + 30 combi boiler

    Hi if someone can help I have just replaced the main pcb on this boiler everything was ok switched the boiler on via the instructions 99k pcb replaced reset turned to reset and nothing is happening they are genuine logic parts.I am not a plumber but i am a sparky.The codes match up for the chip...
  3. S

    Ideal combi logic 30 - F1 code but pressure gauge is at 1.5?

    Hi, The boiler is not working and there is currently no hot water and it is not turning on..F1 message has flagged up and I have read around that this means that the pressure is low..checked the pressure gauge and it is at 1.7? I'm not sure what is happening! If the pressure gauge is okay then...
  4. C

    Ideal logic expert advice

    Hello I have a Ideal Logic heat plus 18 about 2 years old. My work colleague bought an ideal logic heat plus 12 brand new never fitted which is now surplus and he has offered me it for free. I am thinking about keeping it for spare parts can anyone tell me what parts that wont be...
  5. K

    Ideal Logic Plus 30 - loss of pressure

    Hi , you all have probably seen this problem but as im new to this i cannot seem to find the solution. We have an Ideal Logic 30 Combi boiler 4 years old and we are having to top up using the filling loop almost every other day. My boiler engineer assures me its not the boiler at fault although...
  6. W

    Logic Heat 15 loud bangs

    Hi! I live in a rented flat with a Logic Heat 15 boiler. It's been installed for about a year, but just in the past two weeks it started acting up... making loud bangs that sound like someone's set off a firework, and often shutting itself down and displaying F2 or L2 errors. The repairs are the...
  7. C

    Ideal logic boiler question

    Hi all I have had a ideal logic plus boiler for over 2 years now and it's been perfect. I have had it serviced every year and the book has been signed and dated etc so it's all OK. The problem is that last time it was serviced the guy has forgot to reset the date on the boiler and now it's...
  8. C

    Ideal logic 30 combi

    Hi all I've just had this boiler fitted from a gravity fed one only problem I have is I don't have a room st at to control the heating what I would like to know is are they easy to fit and also I have been looking at the hive one can they be fitted thanks in advance
  9. M

    Ideal logic 30 - strange pressure issue

    Hi guys, i had my Ideal logic fitted just over 2 years ago and apart from a fan swap I've had no issues until now and I don't even know if this is an issue, let me explain. i know or guess that I've got a very slight leak in my piping but think it's under a floor somewhere as I've I get air in...
  10. G

    Ideal Logic + no hot water

    Called out today to above boiler. Heating fine but no hot water. Hall sensor is flasing red when demand for hot water but thats it. the motorised head moves fine for central heating but nothing for hot water. Could the head still be faulty if it moves for heating? any help appreciated.
  11. B

    Any logic to hosing rads out before a powerflush?!

    In passing, it was mentioned that when the system's drained down, it would benefit it if I took the rads off and sort of jiggle them round and run a garden hose to help clear them through before a flush was done but, and unless I'm not understanding how a flush works, shouldn't the chemicals and...
  12. U

    Help! My house is like an oven! Danfoss TP9000MA-si installed next to a Logic heat 15 boiler

    Hello, I'm a complete beginner when it comes to central heating and after reading the various instructions (which I'm pretty sure I've followed correctly) I can't seem to get the radiators to stop turning on. I have a Danfoss TP9000MA-si installed next to a Logic heat 15 boiler. The water...
  13. quality

    Ideal logic

    Hi does anyone know the dimension for a Logic 30 combi from the center of the flue to the Wall plate (Back of the boiler) cheers
  14. C

    Ideal Logic 30 - Not Working after removing Condensate pump

    Hi Guys Re decorating the kitchen and found an external gully almost directly under the boiler location. Apparently the previous owner/installer didn't realist was there, because they ran the condensate into pump/trough and then up into the roof space and over to the kitchen sink! I have...
  15. D

    Hot water but no central heating - Ideal Logic 24

    We had this problem a few months ago, where we had heating but no hot water, and the problem was solved by one of the methods (not sure which as we did all of this at once and it could have been any of them or none of them) - I changed the batteries in the (Honeywell wireless) thermostat...
  16. G

    ideal logic 30 fault

    Hi guys, I changed a pcb on an ideal logic 30 as it was stuck on l2 fault, after testing and getting no power at gas valve. I got it all going fine, apart from on hw. When you run the tap nothing registers on the boiler, I took the turnine out and checked it was moving freely, but im not really...
  17. Simon F

    Ideal logic 12 rear flue repair

    Am I right in thinking that to get the flue out of this boiler, the boiler needs lifting of the wall to acces the support bracket. The flue is connected to this, there is no other way of getting to the flue?? it is currently dripping at the seal/conection in the back of the boiler.
  18. M

    Pressure Loss Ideal Logic 18

    Hi I am losing about 1 bar of pressure a day on my heating system. I have read loads of posts with suggestions about what the problem could be. There are no obvious leaks although unable to check hidden pipework but no obvious damp patches etc. I have tried to check whether the pressure...
  19. J

    logic combi

    hello looking help with boiler not working after I ran out of gas saying l5
  20. L

    Ideal Logic in disguise

    Hi Guys Just after a few pointers not really done a lot of faultfinding on boilers but been too a friends who has a ProCombi Exclusive installed in his house. Which i believe is just an Ideal Logic, he realized that the pressure was dropping around 1 BAR every week. He has kept a keen eye out...
Back
Top