water cylinder | Page 8
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

water cylinder

  1. S

    where is the best place to get a hot water cylinder? And what kind??

    Hi Ive just bought a seaside chalet with electric only. Its got an ancient copper cylinder which is starting to leak and needs replacing. Can anyone advise me of a product which will save me electric bills in the long run? It is only for a small 1400mm bath, as having an undersink water heater...
  2. K

    Non Vented Water Cylinder - C & M

    Hi, I had water dripping through the tundish. I have changed the top valve and the non return valve and now the expansion vessel. Its still leaking water through the tundish. Any ideas?
  3. W

    A look inside a hot water cylinder.

    INSIDE A HOT WATER CYLINDER - Plumbing Tips - YouTube
  4. K

    new water cylinder fitted. are all these problems connected

    Hi. just wondering if anybody could help as not certain if all these problems are connected or if I am just having a run of bad luck. Around 6 weeks ago I had a leak in my hot water cylinder which flooded through the ceiling. The system was drained down partially and isolated, leaving us with...
  5. B

    Need a robust immersion heater - direct hot water cylinder

    Hi guys, just wondering if you could tell me where I might be able to buy a more robust immersion heater for a direct hot water cylinder. Cuts does not have central heating or any other way to heat hw but has to change the immersion heater approx after 8 months
  6. R

    Hot water cylinder not heating up (when heating is on)

    As above, my hot water cylinder will not heat up when the heating is on. The hot water will heat up when the immersion is on. The pipes going to the coil are both hot, even when the heating is on all day it won't heat! Any help greatly appreciated Thanks
  7. N

    Collapsed hot water cylinder

    Hello everyone im new to this forum so I would like to say 'hello' and ask a question about a problem that has just happened with a horizontal hot water cylinder there was a huge loud bang last night and the cylinder has imploded. At the time I had a wood burning stove on and just before the...
  8. C

    Installing an unvented hot water cylinder

    Hi. Im thinking of changing my vented hot water cylinder to a unvented indirect one due to pressure issues in my bathroom.. Is changing it over pretty much just connecting it to the mains water in the loft and swapping over the cylinder? Is it fairly like for like in that sense? also...
  9. J

    Replacing a Hot water cylinder?

    Hello. Have a small cottage that had electrics rads in. I want to get a wet central heating system put in. The hot water for the cottage comes via a heating element in the cylinder and the occasional use of a wood burning stove which is plumbed in to heat water as an alternative. Can this...
  10. A

    Why is the puffa jacket on hot water cylinder burnt?

    Hi, Recently bought a 1930s semi and was checking the attic out. Can any one tell me why the puffa jacket on this hot water cylinder is burnt - has it overheated? Since both the pipe near it is copper and the cylinder itself is copper, if it overheated wouldnt both sides of the puffa jacket be...
  11. U

    Leaking hot water cylinder

    From the attached photo is it possible to see if the joint and fitting is likely to be repairable and if so how. David
  12. T

    Hot water cylinder jacket over thermostat?

    Hello all, quick question, just fitted a jacket around my hot water cylinder and left the immersion heater uncovered, should I leave the cylinder thermostat uncovered as well or does it not make any difference? thanks
  13. S

    Hot Water Cylinder for ASHP

    Hi, I wonder if someone will help me resolve conflicting advice from various plumbers regarding the replacement of my old hot water cylinder (20+ years old) which has begun to leak. I had a 14 Kw Ecodan fitted last year (thats a whole other story!!!) but retained my old cylinder in a vented...
  14. B

    Hot water cylinder replacement

    I need to replace a leaking hot water cyclinder. So far I've contacted about 4 plumbers but none have got back to me, so I'm considering tackling the job myself. I have bought a drop in replacement cylinder with connections in the exact same positions. I'm hoping to re-use the existing...
  15. R

    Air noise from hot water cylinder when boiler on

    I’ve just moved into a house that is suffering from air rushing/bubbling noise in the hot water tank when the boiler is on heating the hot water. The boiler is an old oil fired Camray Quartet, I think, as only the manufacturer name is visible with no model number. There is a Zilmet expansion...
  16. J

    Leaking unvented hot water cylinder - help needed - pics included

    HI We've got an unvented hot water cylinder with an element for providing hot water when not being feb by the Stanley Waterford stove which also does the central heating. I've just noticed stains on the ceiling downstairs so took a look at the cylinder and there is tonnes of efflourescence and...
  17. J

    hot water cylinder

    My bro's Hot water cylinder keeps resetting itself, it is a direct cylinder, heated purely by the immersion, the immersion heater keeps resetting, meaning he has no hot water. I have replaced, the thermostat, no luck, the whole immersion, no luck. he has been on an electrical forum and they...
  18. B

    hot water cylinder thermostat

    every few months the wires on my hot water thermostat stiffen and sometimes get a bluish corrosion on them and cause the thermostat to stop working until I replace the wire that has corroded. There is no moisture around the wires so why would this be happening?
  19. S

    selecting a hot water cylinder

    I am in the process of selecting a replacement hot water cylinder and am looking at an indirect unit with the port for the immersion element located on the radius of the top of the cylinder. This means that I need to know how much space is required between the top of the cylinder and the ceiling...
  20. M

    Leaking Water Cylinder

    Hi, New poster looking for some advice please :) Got a water cylinder in the airing cupboard upstairs with an immersion heater on top. After clearing out the airing cupboard yesterday noticed that a load of towels and old bedding was wet through and found a drip coming from the bottom of the...
Back
Top