Gas Safe Engineers | Gas Engineers Forum | Page 5 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Gas Safe Engineers in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
signed up for it way back, just posted there but I'm screwed if I know how I found it or if I can find it again!!
 
hi protherm is doin my headin ive never work on this boiler look at the manual its no help no.. tech help line heating is fine when calling for hot water its not firing where is water flow sensor located healp will be much appreated thankz
 
My mother has got a problem with her boiler its sounds like there's something turning around in the in side of it and sounds like this tick tick tick when its turning does it sound something major thanks
 
Hi chaps, has anyone come across a boiler installation in one property but the flue termination in next doors property, i don't mean terminates across a boundary i mean the whole boiler flue is across the fence in another property
 
Hi chaps, has anyone come across a boiler installation in one property but the flue termination in next doors property, i don't mean terminates across a boundary i mean the whole boiler flue is across the fence in another property
 
you would think so , but the building inside goes beyond the boundary and the boiler is in a cupboard which is on the other side of the fence, very strange.in my estimation this is a no no and would have to be rectified as the fence boundary can't be moved. any thoughts
 
they'd be made to move it if neighbor complained and building control got wind i would have thought. not sure its particularly actionable if not.
 
so i would imagine its more of a building regs situation than a gas safe one ?
 
hi croppie i have sent my photos off the back and front of my card but i have not heard from yourselfes as yet ? is this done ones a month whating two be reconized told you about the spalling before sorry
 
Both forums confuse me but then again I'm new to all this. I'm up for anything that lets me tell them apart.
 
Please be very aware that this is an open forum.

Please take ALL gas related threads where you are discussing the technical and safety related repair of boilers into the Gas Safe Registered Engineers Sub Forum!

Thank you!
would be nice to find this gas safe forum;)
 
Status
Not open for further replies.

Similar plumbing topics

I
No your fine just make sure there registered...
Replies
1
Views
1K
If you can afford to lose 1/2 or more of your...
Replies
7
Views
1K
What about a metal blanking plate?
Replies
5
Views
798
Hi. I have just qualified as a registered gas...
Replies
0
Views
1K
Back
Top