generate work FROM THE FORUM !!!! | Gaining Plumbing Experience | Page 3 | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss generate work FROM THE FORUM !!!! in the Gaining Plumbing Experience area at Plumbers Forums

I didn't realise customers would look to the gas safe site for 'non gas' work, my bad. :) :)

They do it all the time. To be fair I can see how they think that moving a rad etc would require a heating trade as its connected to the boiler. But as we all know you don't have to be gas safe to do it. Don't get me wrong I don't get loads of people asking for bathroom fits (only had the one) but it does happen occaisionally and work like this would be ideal for someone who is not gassafe.

If I had more experiance in the plumbing side then I would take these jobs but since college I have just done mainly gas works like servicing, cp12's and fitting cookers. Only started in the last year or so getting more involved in the plumbing side by fitting rads etc. But like I say I turn these down mainly because I am busybut also because I am very very rusty on the plumbing side having only dealt with boiler and there innards for the past 5 years.

I also think this idea would be good for people learning things, like if one bloke took a job to fit UFH someone who has no experiance but would like to learn could tag along if both blokes agreed and they could learn.


The more I think about this idea I THINK ITS GREAT!!
 
I like the idea in principle but price fixing in the UK is illegal and we don't want to be seen as being dodgy, we get enough stick from the media as it is.
not quite accurate that, price fixing is giving inflated price for a product you cannot buy else where, like gas.
your local taxi drivers all charge about the same in your area dont they?. thats called the going rate.
 
I only need one thing to be done and this is only members from forum to get the leads......as if not then many people not members will come along and get the lead ,therefore customers can get illegal cowboys in estate

of forum members cowboys (us)
 
not quite accurate that, price fixing is giving inflated price for a product you cannot buy else where, like gas.
your local taxi drivers all charge about the same in your area dont they?. thats called the going rate.
I think you will find that the law thinks otherwise:
Competition law prohibits almost any attempt by competitors to fix prices - for example, it will generally be illegal to:

  • agree prices with your competitors - eg you can't agree to work from a shared minimum price list
, Source : Anti-competitive agreements | Business Link

As i said I think its a good idea but I think we should keep the pricing bit out of it
 
Pricing is up to an individual what they want to earn and also
Will depend on location too

Depend on the job as well, a leaky toilet can be anything from missing to a cracked cistern. Until it's seen, it's always difficult to give an accurate cost.
 
Depend on the job as well, a leaky toilet can be anything from missing to a cracked cistern. Until it's seen, it's always difficult to give an accurate cost.
I think we've 3 volunteers to run it , suppose it's down to admin now of where to put it within the forums
 
I think we've 3 volunteers to run it , suppose it's down to admin now of where to put it within the forums

Agreed.

The tilers one looks good, difficult to put it in the arms as only members have access so the custs can't post in there.
 
can it be then customers to list the jobs but there will be another form to fill as not to have there details shown in to the public ! and then the lads who will be looking after the thread just sent details to whoever is near the job but if none available then can go to Mr. Jo Public
 
i was thinkning the cust to fill out the form send it onto us 3 , first to pick it up send it onto the nearest chap/chic then its not a public listing for othere to just start PMing the cust direct
 
can it be then customers to list the jobs but there will be another form to fill as not to have there details shown in to the public ! and then the lads who will be looking after the thread just sent details to whoever is near the job but if none available then can go to Mr. Jo Public

I thought as soon as its posted anybody can pm them. But if the custs have anything about them they will check the forum to check out the people contacting them. Like I posted earlier I don't think it will be perfect from day 1, but need to start somewhere.
 
i recon that might put custards off if they list it and 15 of us start PMing them quotes back. i recon too that memebers have to be registered for that section other wise we will end up with cowboy bob just joining up to get jobs
 
how about whoever responds clicks like on the post then we know the job has been responded to. clicking thanks could signify completion of the job
 
We need some input from those in the know on how the forum works then. I'm just concerned we over complicate things and that puts people off as well. We need a happy medium. I wouldn't be looking to send a quote just on what was posted, I'd be wanting to look at the job, but again this would be dependant upon the job.
 
We need some input from those in the know on how the forum works then. I'm just concerned we over complicate things and that puts people off as well. We need a happy medium. I wouldn't be looking to send a quote just on what was posted, I'd be wanting to look at the job, but again this would be dependant upon the job.

i agree, any prices given should be taken as estimates not quotes. just the same as when a customer rings and says how much? you still need to give a general indication of what such a job usually costs
 
i recon that might put custards off if they list it and 15 of us start PMing them quotes back. i recon too that memebers have to be registered for that section other wise we will end up with cowboy bob just joining up to get jobs

If its got trusted members such as yourself running it then you will only give the details to trusted members which will eliminate cowboys/agencies. They could post the job details on the search for a plumber forum and then you contact them for their address, then pass the details on to the nearest 3 trusted members who can arrange a quote
 
We'll need a list of all the members who are interested in being part of this, where they are based and how far willing to travel. Also the type of jobs willing to be undertaken. I know I live in the sticks but its gonna be a bit tougher in the bigger cities, if we have 5 or 6 members in the right area do we do it on a rota or to all that apply?

We need to draw up a charter then, not anything flash, just some basic ground rules.
 
If its got trusted members such as yourself running it then you will only give the details to trusted members which will eliminate cowboys/agencies. They could post the job details on the search for a plumber forum and then you contact them for their address, then pass the details on to the nearest 3 trusted members who can arrange a quote

yeah put theres nothing to stop joe blogs there though just pm ing them for there address , i just think we need more control over it IMHO but im happy to go with the majority ,
 
yeah put theres nothing to stop joe blogs there though just pm ing them for there address , i just think we need more control over it IMHO but im happy to go with the majority ,

but surely they are posting the job on this forum because they want a trusted plumber so will only take the ones you advise
 

Similar plumbing topics

Set whatever boiler you're installing to the...
Replies
2
Views
922
    • Like
  • Article
The UK Government has today been told to do...
Replies
0
Views
857
That's what I was hoping, looks like a good...
Replies
5
Views
1K
    • Like
Well put Dan, have a good weekend...
Replies
1
Views
1K
J
A gas engineer with respect and quality will...
Replies
7
Views
5K
Mark Butler
M
Back
Top