Illegal hot water tank install | Bathroom Advice | Page 2 | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Illegal hot water tank install in the Bathroom Advice area at Plumbers Forums

Messages
14
Just had a dodgy builder install a hot water tank using a plumber who isn't G3 certified. They then got g3 gas Safe registered engineer commission it, but it doesn't meet building regs (wrong discharge pipe, plastic not metal) and he didn't register it with building control. Any ideas who I can report this guy to? Gas Safe aren't interested as it didn't break gas legislation (though they are going after the builder for illegal gas installation).


Thanks.
 
Always two sides to a story, obviously poor work if gas safe involved (don't hold your breath) and wrong discharge pipe material, however just to quell my curiosity, were the works carried out by the cheapest quote?
 
When your area gas safe representative vists to do a inspection point out your concerns these faults will need to rectified by a G3 engineer and any gas faults by a gas safe registered company , I have had experience of this having corrected a few installations the original installers had to repay a good percentage of the install costs and agree to retrain or lose their registration, their future installs are then inspected to make sure they meet a decent standard workmanship and all the regulations, believe me this is a real PITA and it will really make them think twice before breaking any future regulations . Kop
 
Novice Q here, but why are gas-safe involved in a hot water tank, which I would have thought would be water (plumbing) rather than gas. Gas not being involved in a storage tank?


(never too old to learn :))
 
Hot water cylinders are notifiable to building control so if you have the relevant qualifications recognised by Gas safe, then you can self certify the installation meaning it is fitted to the manufacturers instructions , the benchmark has been completed and the warranty registerd Gas Safe will issue a certificate of compliance like this . Cheers kop

20190126_171624.jpg
 
When replacing a hot water tank, how many peeps notify BC. Maybe you should, but replacing an existing unit.... How many do?
Agreed but it causes problems if you should want to sell the property the solicitor will want to see that certificate of compliance and a paper trail back to the installer it helps to keep the installations to a certain standard, but many get fitted and forgot about as you say. Kop
 
Agreed but it causes problems if you should want to sell the property the solicitor will want to see that certificate of compliance and a paper trail back to the installer it helps to keep the installations to a certain standard, but many get fitted and forgot about as you say. Kop
Lord help me here then, House is 60 years old and very little in the way of "certification". Whether work carried out "professionally" or by me.
 
Agreed but it causes problems if you should want to sell the property the solicitor will want to see that certificate of compliance and a paper trail back to the installer it helps to keep the installations to a certain standard, but many get fitted and forgot about as you say. Kop
Also ever tried making a warrantee claim on an unregistered cylinder (or for that matter a boiler).

I don't think householders realises that it is their responsibility as the owner to ensure work that requires notification is.

It is a shame a few more of them are prosecuted when this doesn't happen, it might make the rest think twice about employing those that can't or don't self certifier!!
It would also maybe encourage those who don't do things properly to do so.!!
 
Also ever tried making a warrantee claim on an unregistered cylinder (or for that matter a boiler).

I don't think householders realises that it is their responsibility as the owner to ensure work that requires notification is.

It is a shame a few more of them are prosecuted when this doesn't happen, it might make the rest think twice about employing those that can't or don't self certifier!!
It would also maybe encourage those who don't do things properly to do so.!!

Without disagreeing, how many householders know all the intracasies of plummbing law, gas law, building regs, etc?
Is that not the reason to go to those that should?
 
Without disagreeing, how many householders know all the intracasies of plummbing law, gas law, building regs, etc?
Is that not the reason to go to those that should?
Absolutely, the problem as we know is anyone in this country can call themselves a Plumber so Joe public can't see the wood from the trees.

I did make the Law of the Land all I can tell you, & them, is that the first port of call for a prosecution for a breach of them is the property owner. And just saying I employed someone calling themselves a Plumber would not be seen as a defence on its own.
 
Absolutely, the problem as we know is anyone in this country can call themselves a Plumber so Joe public can't see the wood from the trees.

I did make the Law of the Land all I can tell you, & them, is that the first port of call for a prosecution for a breach of them is the property owner. And just saying I employed someone calling themselves a Plumber would not be seen as a defence on its own.
you might find that if someone was trading as a plumber, they might be considered as an "expert".
 
They might very well be & then again they might be a 2 week wonder learning at as they go. Unfortunately they have no effective way of telling one from the other, hence all the problems in this industry.
Same with gas installers too, I have never once been asked to see my gas safe I.D card. Too many customers either don't care or are too trusting with taking the plumbers/engineers word.
 
“Someone suggested that if a house is sold the solicitor will want a complete chain of certification”. Being involved with two house purchases recently, this doesn’t seem to be the case. If there is any case of something missing then the vendors solicitor will arrange indemnity insurance, so that if building regs become aware of anything untoward, then the policy will pay to put things right. As long as you don’t dig too far and ask buildings regs before purchase about any probs you might suspect. Most old houses would have something not complying, if you dig too far and ask too many questions you couldn’t buy a house.

A friend sold her house and her solicitor got an indemnity insurance for the electrics. Presumably this is cheaper and easier to do then getting wiring inspected and faults fixed.

I will make a post entitled “fixed 2l per min underfloor leak” and detail some nasties I came across.
 
And that’s how you poke the bears. If you’d had the necessary training and installation experience you’d have known the rules re notification. Being an engineer does not give you the right to do what you like and bypass licenses to work. Competence is key and you’ve proved you didn’t have it
 
Last edited:
And that’s how you poke the bears. If you’d had the necessary training and installation experience you’d have known better. Being an engineer does not give you the right to do what you like
I agree entirely, but I do have, at least an understanding of the principles involved and this was a “like for like” replacement.
I am not having a dig at you guys, just saying that I was not aware before yesterday of any requirement.
I realise that there are also professionals that are professional and have pride in their work. I also have been caught out by cowboys, like the OP and had to redo work to make it acceptable.
This is a really helpful forum and will continue to learn.
 
It’s when you start adding things like “professionals”. We get a lot of engineers on here who think they are holier than thou and think they can’t be touched and supposedly know how to turn their hand to anything. Pure and simply we all have to do and renew our qualifications to ensure that we are up to speed with current legislation so why should these engineers be allowed to think that they are above the law, which is essentially what they do. I’m not saying that all plumbers are the same in terms of quality but the governing bodies could do so much more to educate the public as much as have a go heroes as to who they need for the job and the qualifications that they require.
 

Similar plumbing topics

  • Question
You Can Use Boiler, Heat Pump.
Replies
3
Views
566
  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
980
R
  • Question
No it won't be why the boiler is on all day...
2 3
Replies
66
Views
5K
👍🏻 I knew the fire ones had to be, we've done...
Replies
10
Views
2K
PH is 7.5. Chloride is 194. The last water...
Replies
2
Views
648
Back
Top