New smart circulating pump/ are they win or bin | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss New smart circulating pump/ are they win or bin in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Gazzt

Esteemed
Messages
191
Do you like the new smart circulating pumps or prefer the standard circulating pumps, plumging suppliers in northern Ireland report they have alot of returns of faulty smart pumps.
 
Hard to like the A rated pumps that cost a lot more than ordinary pumps, but save a few pence in electricity and then need replaced in only 2 or 3 years.
I now think of the older pumps as quality
 
Dab Evosta is a nice pump for the money 7m head and the option to switch from a positive head or to modulate down on load , as for grunfosses latest offering a pump which you can control and monitor via a app on your phone the jury is still out on these cheers kop
 
image.jpeg
Dab Evo pumps also give trouble. Electronics and heat don't mix well I suspect, although it might just be faulty electronic parts.
The pump in the photo is 1962 and has been working virtually everyday from then. I was in same house that still has the original owners this week and the heating was still working.
It doesn't even have any isolating valves, but I guess with that reliability it doesn't need them. It is not A rated though, - probably more like Z rated. :)
 
View attachment 29439 Dab Evo pumps also give trouble. Electronics and heat don't mix well I suspect, although it might just be faulty electronic parts.
The pump in the photo is 1962 and has been working virtually everyday from then. I was in same house that still has the original owners this week and the heating was still working.
It doesn't even have any isolating valves, but I guess with that reliability it doesn't need them. It is not A rated though, - probably more like Z rated. :)

I'm sure somewhere in the lockup we have a brand new one (smc)

And these days pumps are designed to fail, if they didn't manufacturers wouldn't have much of a call for new pumps
 
I'm sure somewhere in the lockup we have a brand new one (smc)

And these days pumps are designed to fail, if they didn't manufacturers wouldn't have much of a call for new pumps

What I find incredible is not only has that pump been working for over 54 years, but also the system is filthy.
I wouldn't mind if modern pumps are designed only to last 10 - 15 years max, but they are not up to the job if they cost more but last only 2 or 3 years. The cost to the customer is unfair.
 
I'm sure We were chatting about old boilers being the same recently too! Consumers are being ripped off and big companies are allowed to get away with it :/
 
I'm sure somewhere in the lockup we have a brand new one (smc)

And these days pumps are designed to fail, if they didn't manufacturers wouldn't have much of a call for new pumps

Been asked to rip out a very old system, so went around to quote and found this in the loft next to the cylinder. Excuse the state of the picture. iPhones are rubbish at taking pictures in the dark so had to turn the flash off and use a torch:mad::p:p

image.jpeg
 
One for hot water one for heating before the days of port valves and after gravity hot water :)
 
Sorry didn't know if you knew what they were cant see the branding , don't suppose you took any note of them ?
 
I believe they we're a British Gas favourite at one point. Tried to find out how old it is but current landlord has only had the property for 4 years. It looks at least as old as me:D:p:p
 
Sorry didn't know if you knew what they were cant see the branding , don't suppose you took any note of them ?

No offence taken. I knew how they worked but that is the first One I have seen if I am honest. It is an SMC which is what made me post the picture.:);)
 
No offence taken. I knew how they worked but that is the first One I have seen if I am honest. It is an SMC which is what made me post the picture.:);)

Thought it was but wasn't 100% but the smc blue gave it away
 
As above though the pump is the only thing on the system that is still working properly.
 
As above though the pump is the only thing on the system that is still working properly.

It will and for another good 30 years if oiled and cleaned
 
At a guess I would say 60's but the system does look like it has had some work done on it since then.
 
Not sure what the original was but there is a potterton netaheat profile in there now. But that is about 20 odd years old.
 
Those pumps are called Comet, if I recall correctly. They are SMC and were the replacement for the excellent SMC Commodore pumps. I am not looking this up, - just remembering it.
I used to install both types.
I believe that model came out about 1983/84. I fitted the last previous model Commodores then in late 1983. So it is not that old really.
If I removed that pump, I would keep the heads at least. In fact, a mate of mine has the identical twin head pump on his system. Those pumps can last a very long time if cleaned or kept clean.
Motorised valves were around in the 1960s for sure, but those twin head pumps were just a simple way of doing fully pumped systems. Personally I prefered single pumps
 
Last edited:
Here is a photo I found online while checking if I was correct.
The left one is indeed a SMC Comet pump and typically the more well built pump on the right is the older SMC Commodore model.
image.jpeg
 
Status
Not open for further replies.

Similar plumbing topics

Everything working fine on PP mode - thanks...
Replies
7
Views
914
B
  • Question
Where is the pump fitted on the Woodburner...
Replies
1
Views
1K
And loose efficiency
Replies
2
Views
1K
Anyway, you can always increase the boiler...
Replies
16
Views
1K
Getting some progress on boiler room...
2 3 4 5
Replies
104
Views
12K
Back
Top