Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Questions and plumbing advice in the Commercial and Industrial Plumbing Forum - .
Normal Threads
Can anyone help??!!!
Been asked to carry out a cold water mains installation to serve a fire...
I have a customer who would like a normal domestic gas oven/ hob installed in a pub, the kitchen...
- cal149
- 6
- 2K
- Latest:
- king of pipes
Hi guys
I own a company in Swindon covering all of Wiltshire. We are expanding and looking for...
- centra
- 3
- 1K
- Latest:
- ShaunCorbs
Why do I always get these jobs lol. 293KW direct air heater running on LPG. Was running it...
I have two 0.5m long extensions and two pairs of 45 degree bends. Internal 110mm and external...
- Vee
- 0
- 1K
- Latest:
- Vee
Basically just wanted to say I'd done it :) Now I can say 'I'm commercial don't you know' just...
- cr0ft
- 23
- 230
- Latest:
- tolly
Hi all,
This is my first commercial quote for fitting a couple of 65KW Worcester GB162s. I...
Looking for someone to rerun the first half of a gas run in a bar (25m approx) in Henley as...
- PhoenixServices
- 0
- 2K
- Latest:
- PhoenixServices
Hi there,
I'm a domestic engineer but need to quote a few jobs that would require signing off...
- payney1974
- 18
- 3K
- Latest:
- stani
Hello,
I'm currently working on a project to install a CHP engine at a hotel and installing a...
Here's one. If I service a domestic boiler in a pub. As long as gas pipe is 35mm or under etc...
- finchy01
- 20
- 299
- Latest:
- Last Plumber
Hi guys.
I normally only work on domestic stuff so all my tools are obviously geared to that...
got a problem with a ideal imax extra been in about 13 months (error 08 air pressure switch not...
OK, so given the significant cost of getting commercial gas tickets.. How much do you guys...
- cr0ft
- 16
- 312
- Latest:
- tomplumb83
Hi chaps and Happy Christmas!
Just wanted to know, does anyone on here do commercial gas? How...
Any one ever work on nu-way commercial burners?
Hi there, I hope someone can settle this for me as I'm having something of a dispute with a...
Dear all,
One restaurant is going to install Andrew commercial water heater for hot water...
hi I will be taking my commercial gas safety in January and I am looking for some mock exam...
Dear enlightened ones,
I have drawn a blank on the internet trying to find free commercial...
- MarkTaylor
- 10
- 2K
- Latest:
- rpm
Lookin for a commercial guy to do a boiler with me, the current gas system is domestic but is...
- GQuigley67
- 0
- 953
- Latest:
- GQuigley67
thinking about doing commercial catering, can anyone recommend any good CoDC1 courses in the...
i have a friend who is setting up a new venture he has worked in this field for quite a few...
if you can keep this to your-selves ;) but a heads up for any of your commercial guys...
Hi, im looking for an independant gas engineer with commercial tickets to undertake looking...
- missplumb
- 0
- 933
- Latest:
- missplumb
Hi just looking for an example of how you layout your portfolio. I have documented my times...
- Craig Johnston
- 2
- 1K
- Latest:
- colshaws
When does domestic gas become commercial gas? I know its boilers up to 70kw. seem to remember...
Alright lads- I didn't put this on Facebook because of all the gas gods on there. I'll be doing...
- Neil K
- 8
- 156
- Latest:
- Neil K
OK I have had plenty of experience with installing/maintaining domestic heating/hot water...
- matt666
- 18
- 5K
- Latest:
- bright spark
Plumbers Talk
New Threads
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 1
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 0
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-
-
Boss your bathroom - Join the Tile High ClubTrade Account Victorian Plumbing 10% off for...- Started by Dan
- Replies: 0
-
Mixer Tap Cartridge change advise.Hi Our kitchen mixer tap is leaking around...
- Started by Eejay
- Replies: 1
-
What plumbing tape is recommended for a copper waste water pipeHi there, We have a leaking waste water pipe...
- Started by Tellie
- Replies: 2
-
Programmable digital cylinder statI bought one of these: and I am using it to...- Started by siricosm
- Replies: 9
-
Heatrae Sadia multipoint 50 issue?Hi folks I’ve never installed or maintained...
- Started by macka09
- Replies: 3
-
Is this bend in a PEX pipe too much?Hi, I by chance discovered that amongst a...
- Started by techweb
- Replies: 5
-
-
Bathroom Fitter in Newcastle Under Lyme RequiredBathroom Fitter in Newcastle Under Lyme...
- Started by Dan
- Replies: 0