Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the General DIY Plumbing Forum - Ask DIY related questions in this forum.
Normal Threads
I have read that an Auto Bypass Valve (ABV) is not compatible with a pump set to Proportional...
We have a kinked copper pipe that leads to the dishwasher under our sink. All I would like to...
Hi - I'm looking to install an observation chamber which will have 160mm pipe running in and out...
- MDDIY2022
- 0
- 478
- Latest:
- MDDIY2022
I have a Danfoss 2-port valve model HPA2 (which has suspect motor issue)
I can get Honeywell...
Hi,
I have an issue with my Grant Vortex internal combi boiler. Specifically the electrical...
I fitting a new Mira shower in a slightly different position in the bathroom. It’s going to be...
how do l measure x dimensions on lcs
- charlieboiy
- 1
- 580
- Latest:
- ShaunCorbs
Hi all,
First Post on here. I am hoping someone can help with the below.
I have mounted 2 new...
Hey guys, sorry if this is a daft question but ever since we've had our hotpoint washing machine...
- tecnam2011
- 7
- 979
- Latest:
- tecnam2011
Good morning everyone. My parent had a new kitchen and bathroom fitted in her flat 2 years ago...
Hi folks,
I'm weighing up the cost of relocating 5 radiators in a 3 bed semi-detached house...
Hi everyone,
Does anyone know if such a thing as a timed TRV exists?
I need a TRV that is...
Hi,
Hoping that someone could please identify what this leaking fitting is, such that I can...
I have had a copper pipe shark bite fitting fail dramatically resulting in lots of damage. This...
Hi
Can anyone advise how the copper push fit connectors work?
Is it a matter of just pushing...
Hi, I wonder if you could help me. The overflow pipe drips intermittently from the large cold...
I have a rusty radiator in the bathroom, not worth repainting as there is already paint on top...
Hi,
I'm really struggling to find out what part I need to use deck valves like this
with a...
Hi,
Installing 2 new bathrooms, property only had 1 bathroom and the waste went into a cast...
Hi, I am looking to install a standpipe to drain the water from the washer. I took a picture of...
- m_d_r12
- 6
- 1K
- Latest:
- ShaunCorbs
I'm trying to access the inside of this tap but can't see any 'button' at the back, or similar...
- monkeybrains74
- 2
- 578
- Latest:
- monkeybrains74
Hello, just joined with a question:
I’ve two self cutting taps that need removing as they’re...
- Tinbucket
- 1
- 702
- Latest:
- Ben-gee
I have a gas boiler heating radiators and also heating an unvented cylinder.
I have a Honeywell...
- Douglas2404
- 2
- 789
- Latest:
- ShaunCorbs
I wonder if someone can recommend me a new thermostat. Something cheap that I can just order...
- Kingerna1
- 4
- 660
- Latest:
- Kingerna1
I am plumbing in my washing machine and the copper pipe with blue tap/switch on it has no water...
Hi There,
I want to swap out my old valves for TRVs but the threads are different sizes, and...
Hi there. I’ve installed a new towel radiator and I’m trying to fit the valves but I’ve come...
Hi everyone, I have an outdoor open drain which runs along the side of our house and then into...
Fitted a towel radiator today, I ptfe taped the radiator tails, and after installation noticed...
I have an Moretti Aria monobloc kitchen tap with solid tap heads and no grub screws on the tap...
New Threads
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 0
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-
-
Boss your bathroom - Join the Tile High ClubTrade Account Victorian Plumbing 10% off for...- Started by Dan
- Replies: 0
-
Mixer Tap Cartridge change advise.Hi Our kitchen mixer tap is leaking around...
- Started by Eejay
- Replies: 1
-
What plumbing tape is recommended for a copper waste water pipeHi there, We have a leaking waste water pipe...
- Started by Tellie
- Replies: 2
-
Programmable digital cylinder statI bought one of these: and I am using it to...- Started by siricosm
- Replies: 9