Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Discuss What we all working on this week ? in the UK Plumbers Forums area at Plumbers Forums
No, it could do if they had the water storage capacity but they are restricted with space.
It’s not my day today
finished the boiler off and come to fire it up no oil flow either someone’s forgot to order some or someone’s nicked it which do you think the builders sticking to
and then my testo decides to crap itself only just come back from service
Made a bit of progress
Do you mean for the CW supply or drainage? The machine empties into a settlement tank and then into a Drainmajor which will pump it up about 5m to a soil stack in the building. CW wise, I'm undecided what fluid risk it is at the moment. It doesn't actually hold any water as such, it just fills at a steady rate from the top of the drum and discharges out of the bottom through an open waste. Its not possible for it to over fill into the machine itself as the water just runs straight out of it. Id like it to be CAT 3, but it might be CAT 4
Both, the drum
It uses aggregate and chemicals, but they don’t mix with the water before going into the mixing drum, they both have separate supply lines so I can’t see any risk of contamination. I’d say that there is less risk than you would get with say a dish washer or washing machine, I might just fit a double check valve. The other option is an RPZ valve but they are pricey and not so easy to get hold off.
The fill port is above the spill level so no risk of contact if it over flows
Meanwhile on the Shaun and Mossep thread......😛
Thought I’d try changing the conversation... it didn’t work.
In the nicest possible way, that looms like a nightmare of a job! I hate doing bathrooms and take my hat off to you, will look great once you have finished 👏
Grouting these up today i can't finish em completely as family issues have forced me to stop working from today , got metros finished done on the opposite wall but still a good couple of days to complete the job ☹️
