fire | Page 5

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

fire

  1. B

    Gas fire identification

    Hello all, Just wondering if anyone out there can identify the gas fire from the picture. It says manufactured in Birmingham by either BFO or BFD. Any help appreciated
  2. Super Mario

    Capping off gas fire old pipe

    what fitting would You use here?
  3. Inverness

    Worcester ri 24 service mode max wouldn't fire but blue flashing light 5 times

    hi guys, went to carry out a service... went to high fire setting mode but nothing happened? Blue flashing light 5 times.. checked condensate not blocked.. flue good.. Reset the thermostat knob but nothing happened. Standing gas pressure 25mb to the gas valve.. When I put the heating on from...
  4. M

    Wall Mounted Electric Fire Under Boiler

    Hi, I've converted half my out-house into a small office. It's getting rather cold in there now the temperature is starting to drop. I want to wall mount an electric fire but the only space available is underneath my boiler. I'm concerned this could be dangerous. Any advice is welcome...
  5. S

    Fitting a Gas Fire on an external wall.

    Hi all. My mother has a large lounge with central heating. Because the layout forces a sofa to block a rad she also uses a portable gas heater in the winter months. She now wants to replace this with a fitted unit. The lounge has a faux surround on an external wall with no obstructions outside...
  6. hary_j

    Help with identifying gas fire Make

    Evening guys, Can anyone help with the Make & Model of the gas fire shown? Excuse the blacked out image. Thanks
  7. B

    How to properly disconnect a gas fire

    Hi, I need the gas supply to my gas fire capped as I want to remove my gas fire. I attach a photo of the elbow restrictor, which has a shut off valve underneath it. I have been given a 'provisional estimate' of £150 for the job by one gas safe engineer (which makes me think that he doesn't...
  8. Inverness

    Valiant ecotec plus 831 high/low fire settings

    hi guys, came across my first valiant combi. I couldn't figure out how to get high fire and low fire to check my ratios and co2. There wasn't a manual. Any advice? I'm used to Worcester boilers.
  9. Chalked

    So thats why it won’t fire

    Worcester danesmoor. Customer ring to say they have been resetting the boiler for weeks. Ran out of oil and sucked sludge right through from the tank, right into the pump. Cleaned out and got it to go, but fitting a new pump on Thursday .
  10. Inverness

    Oil boiler trying to fire up and grinding noise

    hi guys went to replace a leaky oil flexi hose today which it beers leaking for some time.. So when I fired the boiler on it was if it was struggling to fire up and there was a grinding noise too. Would this be a new oil pump? I'll be doing my oftec at the end of this month. Cheers to all you...
  11. R

    Noises from both fire and central heating

    I had a new glass-fronted gas fire installed a few months ago, not long after I moved into my bungalow. About half an hour after turning the fire on I hear a loud pop or crack coming from the wall where the fire is. I hear this roughly once every half an hour. I also hear this noise a couple of...
  12. S

    Gas fire mystery problem

    Hi all, I'm a member of the public with a persistent problem with a gas fire that's been looked at a couple of times and is still not right. I'm not looking to repair it myself but just want a bit of impartial input before I spend any more on it! Basically it's a new (less than one year old)...
  13. D

    Does valve or thermostat fire boiler please?

    Need to get someone in to change motor on valve as no hot water unless valve is manually locked open but it may be a while as plumbers busy. Will locking the valve open cause the boiler to fire or is it the thermostat that fires the boiler? Currently using immersion but would prefer gas as...
  14. A

    cooker and gas fire installations

    Hello I'm doing a gas engineers course and I'm struggling to find any work experience for cooker and gas fire installations. Seems nobody wants new gas fire these days. I'm looking for someone to take me on a job just so I can complete my assignment. I'm based in London and I'm happy to pay if...
  15. Keefy

    Brand new gas fire for sale

    Selling an unopened one of these: Valor Blenheim Brass Inset Gas Fire | Departments | DIY at B&Q £100+Recorded postage.
  16. J

    Can anyone service my gas fire - no tools/info left left by seller - Gazco Eclipse type

    I have inherited what looks similar to the current Gazco Eclipse gas fire but the sellers left no instructions. I have had 3 gas engineers in the house but none are familiar with the model and specifically how it is opened/accessed to begin with. One did say it looks like an allen key...
  17. G

    Servicing gas fire gas valve.

    Ive just shut off a Main madrigal gas fire because the gas valve is jamming and not shutting off the gas when the pilot is extinguished. I cant get a replacement valve because of the age of the fire. G.C. 32-477-65. How easy is it to service these valves, what will I need and what is the success...
  18. G

    Setting up a shower block fuelled by rocket boiler/wood fire

    I am setting up a campsite and want to build a shower block that has a boiler heated by wood (or sawdust). I need a plumber who has experience in this. There will be three showers that will run for around 4 hours a day and the campsite is based near Chichester. If this sounds like something...
  19. P

    Gas fire shut off valve

    Are there any gas 'floor shut off vales' available in the uk
  20. B

    Boiler will not fire up

    Hi all, Cant get the boiler to fire up, thus no heating. Messed a bit with it earlier today, and re-programmed the Danfoss controller, and it worked. Heating was on, and then went off on time, but didnt kick in on the next cycle. Tried setting temp up high on thermostat, and turning electrics...
Back
Top