size | Page 7

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

size

Recent contents Top users
  1. U

    Thread size help please

    Hi all Am doing a bit off DIY fitting a sink and all the pluming the size off the nut coming from the tap pipe is G1/2 Am I right on thinking that a 15 mm isolating valve will screw onto it ok? Sorry for silly question but very new too all off this diy plumbing . Many thanks Paul
  2. L

    New boiler installation, pipe size question and controls please

    Hi, About to complete on a 3 bedroom semi detached house, upstairs downstairs. Current combi is upstairs in the bathroom and the intention is to buy a new Baxi HE33 and put it downstairs just off the kitchen so nearly directly below the old current boiler. Total number of radiators for the...
    • larneylee
    • Thread
    • boiler installation new boiler pipe size
    • Replies: 5
    • Forum: Boilers
  3. jaydebruyne

    Steel pipe size identification

    i need to cap this pipe under the floor, will need to remove the elbow and fit a cap. Not sure what size the pipe is. 1/2 inch??
  4. J

    Monobloc kitchen tap hole size

    Hopefully this question has a simple answer. I'm looking at monobloc taps for my new kitchen. I am having a granite worktop and they have asked me what size hole needs to be drilled to accommodate the pipes for the tap. Some of the taps I've seen online say 35mm hole size, while others don't...
  5. G

    Looking for mixer taps with shower attachment unusual size.

    Hi I am reusing an old cast iron bath but when measuring the distance bettween center of tap holes the results came out 7.5 inch (190mm). I notice all the mixers with attachments are usually 180mm so will I just have to settle on single taps or can I buy 190mm mixers?
  6. Stants

    Pipe size for unvented cylinder and boiler

    hi I have an issue with running pipes ( the route )for a boiler and and unvented cylinder 1 can you combine bother together ( t one into the other) 2 if so what s the minimum pipe size for both ? As I have to either go over , under or dare I say through a steel .... it's in a loft Con Thanks
    • Stants
    • Thread
    • boiler cylinder pipe size unvented unvented cylinder
    • Replies: 12
    • Forum: Boilers
  7. A

    Difficult to find radiator size

    Hello. I need to replace a radiator 2250 x 450mm. I'm finding it hard to find a new one that size. I see Radson make one that size but I have found no UK stockists. Does anyone know where I should look? Screwfix has a 2200 x 500 which would do at a pinch but I'd rather get the exact size. Thanks
  8. R

    Worcester Bosch Heatslave 20/25 oil hose size

    Worcester Bosch Heatslave 20/25 oil hose need to pick one up from my local plumb merchants and hes asking what size connectors male female etc does anyone know the spec i require thanks
    • richard3009
    • Thread
    • bosch size worcester worcester bosch
    • Replies: 2
    • Forum: Boilers
  9. wattsie1987

    Circlip plier size query

    Anyone know what size circlip pliers are required for the vaillant spy glass circlip? 3-10mm 8-13mm 12-25mm are the options of pliers. Cheers Liam
  10. J

    Which size gas terminal?

    Originally, I though this was going to be a straight forward question and then just now I checked something. To cut a lengthy explaination short...a friend has what we thought was a living flame fire, which sits within a brick chimney breast. Work is being done on the chimney on the roof and it...
  11. J

    Howto calculate radiator size for room

    How do I calculate the correct radiator size to heat a room? There must be a formula somewhere even if its only rule of thumb ? Our current radiator is taking 4-5 hours to heat the room up to about 20C This seems excessive to me. The radiator does get hot and has been bled - no cold patches...
  12. M

    Boiler size and costs

    Hi all. Thanks in advance for any advice. I am not sure if I'm posting in correct place but I need a commercial boiler system. Regarding me: complete novice, convert/renovate the odd building when opportunity allows, currently taken on my biggest job which is to convert a church into a care...
    • Maqi99
    • Thread
    • boiler size
    • Replies: 34
    • Forum: Boilers
  13. I

    Standard size for the cut out on a kitchen sink

    I was wondering if anybody could possibly confirm if 35mm is the standard size for the cut out hole for a kitchen sink tap? Any help would be appreciated.
  14. M

    Microbore advice - please! - New run pipe size before reducing to microbore

    Hi All I want to add a radiator to a microbore system; the supply and return pipes are all 22 mm feeding a mixture of 10 mm or 8 mm microbore which are taken directly from the ends of the 22 mm pipes. I plan to "T" into the 22 mm supply and return pipes with a run of "large bore" pipe before...
  15. S

    what size stove do i need for my house

    Been meaning to upgrade my heating system for a few years but always had something came up and put it off untill now. Its a 2400sq ft dormer built to 2004 regs. Oil burner but now i want a duel system and going to install a back boiler stove. Wanting to know what solid fuel kw stove id need or...
  16. P

    What Size Is The Spout Thread On A Garden Bib Tap?

    Just a quick, basic one. What size is the thread on the spout of a garden bib tap? Is it the same size as a washing machine hose? Basically I want to replace one of these - with one of these - Pegler Yorkshire - I want to know if the screw-on hose fitting I have on the self-cutter will fit...
  17. J

    New water supply pipe what size feed into boiler?

    Hi guys, Need a little help here and very new to all of this. We have a Victorian house and are struggling with low water flow, although pressure is ok. We want to have a decent thermostatic shower. Currently it is on a common supply pipe and we are house number 5 and it has a combi boiler...
    • Jamesc1234
    • Thread
    • boiler pipe size supply water
    • Replies: 19
    • Forum: Boilers
  18. M

    What size is my copper pipe?

    Okay, I know what size it is. It seems to be 15.5mm OD. 0.5mm of crud doesn't seem likely, so what size pipe could this be. I've measured some actual 15mm pipe and that is pretty much 15mm, plus a couple of thou. From what I've read, 1/2" UK copper pipe would be slightly smaller, not larger...
  19. A

    What size are my gas pipes?

    Hi Guys Simple question I hope. I attach photos of pipes near meter. Any idea on how I would tell what size they are ? (25mm or 12mm). I can supply more photos if necessary. Many thanks. Pasteboard — Uploaded Image Pasteboard — Uploaded Image Pasteboard — Uploaded Image
  20. S

    Boiler is it the right size?

    Hi everyone and thank you for any advice and suggestions in advance. We moved into our property 4 years ago and had the CH upgraded to a system boiler and tank system. It has never warmed the house properly but we just thought this was due to renovating e.g odd rad off wall, bare floor boards...
Back
Top