HALL of SHAME PHOTo`s | Plumbing Jobs | The Job-board | Page 109 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss HALL of SHAME PHOTo`s in the Plumbing Jobs | The Job-board area at Plumbers Forums

This beauty has now been removed and the boiler replaced in a more sensible location with correct flue.
2890242684b7a3eb92e55c7cca1d924c.jpg
2c31fbac49707cd4a058225950150a6b.jpg
 
13500_562113990596910_7112995435484471666_n.jpg1012288_562114033930239_3115415165385519458_n.jpg11267738_562113953930247_2902052803027071277_n.jpg

ripped out this ravenheap today,fitted by a local halfwit gsr,crap work,condensate looks crap,its a attempt to create a trap,dont know why,the boiler has a internal one ,its not sealed at the top of the 40mm,flue was also not sealed either end of the wall,thats rock wool making good FFS,flue pulled apart in my hands,and yes BG had been looking after it,though i am not slagging BG it is after all down to the engineers judgement
 
Last edited by a moderator:
Mates doing his kitchen up, popped round to see how he's doing, said he turned gas off cause he could smell gas, wonder why lol, lucky was in me van. Stripped out and capped off till I can get him the bits he needs Monday. Think previous owner of the property loved DIY looking at all the other shoddy work that's gone on.

 
builders for you lol electric auto open windows (temp)

IMG_0486_zpsmfsuigqx.jpg
 
Have to smile

IMG_0816_zps0dxqaokl.jpg
 
It's not meant for turning of is it, some rough sods out there could it be the bricklayer.

:D and to make it worse it was on a sprinkle system and this at the other end and yes the stop tap was the wrong way round as normal :D

image1_zps40xt9htw.jpg
 
image.jpg

Inlets to pump taken from under the bath (other side of the wall)
Wrong hoses fitted.
 
got called out to a county school water peeing eveywhere, opened the pannel to find most joints had pop or pulled out and this is what i found, little side note this was done by a plumber and not a builder.

IMG_0680_zpse7p7js9m.jpg


IMG_0681_zpsd1qbqomw.jpg


IMG_0682_zpsxadryehr.jpg


IMG_0684_zpsmfyalxtw.jpg


two points and a thanks goes to the first correct answer to what is this coil being used for :D

IMG_0686_zpsteygxzxs.jpg


if you would like to see the image bigger, right click on image and view image :)
 
Last edited by a moderator:
Unvented under unit heater and the coil is extending the distance to the first stop tap, so no expansion vessel required.

winner winner chicken dinner
 
Unvented under unit heater and the coil is extending the distance to the first stop tap, so no expansion vessel required.

but he read the instructions wrong (straight pipework) made my day that did pita to fix tho
 

Similar plumbing topics

  • Article
Baxi duo tec compact and a combimate 7 year...
Replies
1
Views
481
  • Question
Thank you, I’ll do just that. Much appreciated
Replies
2
Views
349
  • Question
There's no leaks anywhere above it. The water...
Replies
3
Views
369
There is 6 pipes under the boiler and one goes...
Replies
19
Views
1K
Back
Top