-
We recommend uHeat for Underfloor Heating Systems, and The Wetroom Store for all things bathrooms and wetrooms. They provide discounts for forum members.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
HALL of SHAME PHOTo`s
- Thread starter Barry98
- Start date
-
- Tags
- None
the original installer phoned me up to say why he had put the loop in and they reason was it all wouldn't fit if he had used an pressure vessel and the other kit, so 1 day later and i sent him these pics back 😀 saying you said what wouldn't fit, never had a response tho
mods if not allowed plz remove
A
Aquaman
I could spend all day in here just reading over and looking at some of the pictures! funny but horrendous work!
green thinking...very eco friendly lol
green thinking...very eco friendly lol
A
Aquaman
Lol, some people are clueless!
J
julesverne
Didn't realise I'd been doing it wrong all these years chip board on brick walls walls.
You do really have to wonder about some so called professional tradesmen.
You do really have to wonder about some so called professional tradesmen.
J
julesverne
Didn't realise I'd been doing it wrong all these years chip board on brick walls walls.
You do really have to wonder about some so called professional tradesmen.View attachment 21870
You do really have to wonder about some so called professional tradesmen.View attachment 21870
D
dave1
Radiator plug used to isolate a gas cooker point.
D
dave1
B
Billy Bob Bob
feeding a 105 e,FFS lazy bastids,been like this for 12 years,easy to upgrade the gas,boiler in loft,gas meter 40 ft below it with a strait external run,which is what we are now doing ![WP_20150602_001[1].jpg](https://plumbers.s3.eu-west-1.amazonaws.com/data/attachments/18/18073-b87aeede434ae52754e50930a6e3d9c6.jpg?hash=uHru3kNK5S "WP_20150602_001[1].jpg")
![WP_20150602_003[1].jpg](https://plumbers.s3.eu-west-1.amazonaws.com/data/attachments/18/18074-6aab4d8b69205de368a51c358ad1e77d.jpg?hash=aqtNi2kgXe "WP_20150602_003[1].jpg")
![WP_20150602_004[1].jpg](https://plumbers.s3.eu-west-1.amazonaws.com/data/attachments/18/18075-abd6742cbf9fe6daca02029aa2e5187e.jpg?hash=q9Z0LL-f5t "WP_20150602_004[1].jpg")
D
Dotty
Well, it's plastic....
Last edited by a moderator:
D
Dotty
Oh, why won't you go the right way up?
Last edited:
E
Ermintrude
I need not say anything
where's the clips 😀 and support for the cylinder
E
Ermintrude
If only I knew who installed it I could ask them.....
L
LPC
What is that thing on the gas pipe?never fear shaun is here
D
Dotty
Correct. There's a gas safety panel connected to a low level gas sniffer (it's lpg) which knocks the solenoid of in the event of an emergency, a leak or an internal fault.
did you correct the faults?
good old new build plumbers
(ignore the level valve )
being held via the flush pipes, and yes them little pita flex valves were the only iso other than the main 2" stop valve
(ignore the level valve )
being held via the flush pipes, and yes them little pita flex valves were the only iso other than the main 2" stop valve
Last edited:
D
Dotty
Nah. It was a quoted service in a school. Remedials go in a report back to the office for them to issue a quote.
Unless it affects safety or operation in which case it'd be an immediate remedial.
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.