HALL of SHAME PHOTo`s

[plumben]

Nah. It was a quoted service in a school. Remedials go in a report back to the office for them to issue a quote.

Unless it affects safety or operation in which case it'd be an immediate remedial.

I know its probably a long debated topic, but isn't the plastic potentially popping of and spraying red hot water out a concern for safety?

 

[Dotty]

I know its probably a long debated topic, but isn't the plastic potentially popping of and spraying red hot water out a concern for safety?

If you're referring to the corrugated pipe, it's a condense.

The safety discharge pipe was well clipped and secure.

 

[Riley]

I think he meant the pushfit fittings. Always ambiguous how close to the unit they can get.

 

[Dotty]

Mmm. They're down to be replaced with compression or yorkshires owing to the fact they're bloody ugly.

 

[ShaunCorbs]

Mmm. They're down to be replaced with compression or yorkshires owing to the fact they're bloody ugly.

yorkshire much better or if still wet crimp and you doing the bonding as well?

 

[Riley]

True enough cropster

 

[Billy Bob Bob]

yes its a alpha,yes its now in the scrap bin,lucky the electrics did not explode below the flue

 

[Billy Bob Bob]

cant upload all the pics

 

[Sparkgap]

Had a survey at a factory to replace their hot water plant. Site manager mentioned that HWS circ was a bit poor, although the pump was running....

 

[Sparkgap]

....

 

[PlumbBobBob]

Had a survey at a factory to replace their hot water plant. Site manager mentioned that HWS circ was a bit poor, although the pump was running....

well that's gonna work not lol

 

[kris]

You just wonder wot goes through some engineers heads lol

 

[Sparkgap]

You just wonder wot goes through some engineers heads lol

The same thing (in the same place) which says 'lets put in a super mega-sized gas water heater and 100 gallon storage cylinder (which heats up in 3 mins from cold!!!) to serve several basins and a couple of sinks, don't bother to insulate the pipes because it'll keep the factory warm, oh, and while we're at it stick in a couple of booster sets to feed some washdown hoses but chuck in a couple of 100 gallon storage break tanks to feed them with electric immersion heaters to keep the water hot after they've come off the hot water system' :dead:

 

[ShaunCorbs]

least its nice and easy to fix

 

[Toxic Ted]

You just wonder wot goes through some engineers heads lol

Engineers?

 

[Toxic Ted]

You just wonder wot goes through some engineers heads lol

Engineers?

 

[shyguy2005]

Speedfit sales are on the up!
View attachment 20168

Regards

Arthur

Loooool nearly got tears coming here!! Just picturing the guy showing this masterpiece to the customer before he bills him lol how did he keep a straight face!

 

[Sparkgap]

Loooool nearly got tears coming here!! Just picturing the guy showing this masterpiece to the customer before he bills him lol how did he keep a straight face!

My creation lives!!!!!! Bwahahahahahah!!!!

 

[townfanjon]

Nice pump though !!!

 

[BN9Pete]

Why?:dunce:

I'm not sure what goes through some people's minds when they get their tools out.

 

[chris watkins]

View attachment 22178

Why?:dunce:

I'm not sure what goes through some people's minds when they get their tools out.

Cos they just had to find a use for that 135deg 40mm tee they have had in their box for years !!!
O dear it doesn't quite fit, still never mind close enough.

PS. is the air brick some kind of weir overflow or perhaps it's an extract system which removes the foul smells coming from the gully transports them safely under the house & out the other side ?

 

[solutions]

View attachment 22178

Why?:dunce:

I'm not sure what goes through some people's minds when they get their tools out.

The same kind of hissing noise you get when you put a pin in a beach ball.

 

[ShaunCorbs]

whats on the gas and them pipes are a bit out

 

[ShaunCorbs]

View attachment 22199

whats on the gas and them pipes are a bit out

 

[Ch4 plumbing]

Can't see anything on the gas pipe? Can see 2 zone valves on the heating flow?