Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
I had an original central heating/hot water system incorporating a single pump, single room stat...
Hi Guys,
Sorry for making my first post quite a big one, but I've been searching for options...
Anybody come across this? Six zones on simple thermostats. Seven loops, one zone on two loops...
Hi
Can anyone recommend a good central heating controller that I can use to control my 3...
Hey if putting inhibitor in an multi-zoned system ( S plan plus). With an underfloor heating...
I turned my heating on for the first time this year and found that although the hot water is OK...
Fist of all hi all, first post. Stumbled accross you lot whilst googling away.
With the help...
Hi Guys,
Went to change head on a danfoss three port today and the old valve had 5 wires and...
Hi,
Im sure this question isn't a new one but im having to add another zone for an extension...
Hi all,
I have two Nest thermostats that need to be installed on a zoned system (Honeywell...
- Kemik
- 11
- 14K
- Latest:
- chris watkins
On a heating system linked to indirect hot water cylinder (S plan plus underfloor heating zone...
- Mgrant
- 15
- 2K
- Latest:
- Alex Pelton
Alright lads looking for some advice. Had a situation where every time the hot water zone valve...
hi
good morning all,
i am planning to install heating and hot water system in large house.
just...
Hi all,
Discovered a problem with our central heating not working yesterday, I am a plumbing...
Hi - we have a pellet boiler that heats three zones. I want to be able to work out what...
Hi, is the dhw zone valve in the wrong spot here, before the cold feed & expansion?
The...
what is the 6th wire on a honeywell zone valve
is it as i suspect not used on a w plan and can...
Hiya fellas,
I'm after a little advice on wiring up the above through a 10 joint connection box...
hi guys looking for some technical advice just replaced a drayton ZA5 actuator valve head as...
Hi, I am new to this site and I hope I am posting my query in the correct forum.
i have a...
- Manishpatel1971
- 12
- 1K
- Latest:
- AWheating
has anyone used the corgi zone valve heads from toolstation they say they fit Honeywell - they...
Hi There , Could some of you experienced Guys out there give me some advice please . We have...
Hi,
I have just bought a new house, the heating is shot which I knew so we are ripping it out...
Ok so I have a Worcester greenstar 34 CDI classic combination boiler, hot water come on...
Hello all.
We are currently building an extension on our house and will have a 4 bedroom house...
Good evening everyone
We're just starting work on the heating part of a major house renovation...
Dear All,
We're doing a remodel of our mid terraced house. After much agonising to do with low...
- dgrs
- 2
- 1K
- Latest:
- SimonG
I was looking at getting zoned heating in my house but my other half wil not have wireless...
Morning all
I've been getting some great advice about controlling the heating system in our...
- vetinry
- 21
- 9K
- Latest:
- Roger Welton
Hi,
I am trying to redesign my CH system, at the moment I have 3 floors, ground 1st and 2nd. My...
Plumbers Talk
New Threads
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 1
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 0
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-
-
Boss your bathroom - Join the Tile High ClubTrade Account Victorian Plumbing 10% off for...- Started by Dan
- Replies: 0
-
Mixer Tap Cartridge change advise.Hi Our kitchen mixer tap is leaking around...
- Started by Eejay
- Replies: 1
-
What plumbing tape is recommended for a copper waste water pipeHi there, We have a leaking waste water pipe...
- Started by Tellie
- Replies: 2
-
Programmable digital cylinder statI bought one of these: and I am using it to...- Started by siricosm
- Replies: 9
-
Heatrae Sadia multipoint 50 issue?Hi folks I’ve never installed or maintained...
- Started by macka09
- Replies: 3
-
Is this bend in a PEX pipe too much?Hi, I by chance discovered that amongst a...
- Started by techweb
- Replies: 5
-