commercial pictures ?

[on31ll]

show us pictures of your installs or what you work on etc ??:santa_cheesy:

 

[Ermintrude]

How many ribs is there a formula? Rule of thumb?

 

[lame plumber]

watched a welder last year securing some plugs/rods into our keel, stainless steel, as the previous ones had all failed! He was one of the lads welding up our nuclear subs for babcocks I think, as ever its the preparation but once he finished the job you could only just see the weld!! sad to say the boat came back fm refit and the keel had come off and on again, so now we have 10 splatter points waiting to fail.

 

[Scott_D]

How many ribs is there a formula? Rule of thumb?

Rule of thumb - try and get the same amount of heat into the ribs as the weld.
So if you think a 2" branch will take 6 rods, use 6 rods on the ribs

 

[hammers4spanner]

watched a welder last year securing some plugs/rods into our keel, stainless steel, as the previous ones had all failed! He was one of the lads welding up our nuclear subs for babcocks I think, as ever its the preparation but once he finished the job you could only just see the weld!! sad to say the boat came back fm refit and the keel had come off and on again, so now we have 10 splatter points waiting to fail.

If he worked for babcock then most of his day would of been sleeping and eating

 

[missplumb]

this is an old install we did a few years ago, 3x steibel ground source pumps, 2x hot water air source pumps.

 

[Ermintrude]

Love all the copper! Nice use of heat mats on ply...... One burn ruins all that work

 

[IDCHAPPY]

Man, me and a multitool with a big scrap bag could have soooo much fun in there :lol:
Lovely install missplumb 🙂

 

[missplumb]

Love all the copper! Nice use of heat mats on ply...... One burn ruins all that work

thats what happens when you leave apprentices to get on with the job!!!

 

[kris]

Nice n neat , really neat pipework but youl have to issue your apprentice with a heat mat, i always use ply where i can, its extra work but looks neat and makes clipping easy, good job missplumb

 

[Ermintrude]

thats what happens when you leave apprentices to get on with the job!!!

Ok !!!!!! We believe you 😉

 

[mfgs]

Very nice, neat install.

 

[MarkAqua]

some of my sites. I also work at St Paul's Cathedral, Lambeth Palace (Archbishop Canterbury home), London Airports Etc.

 

[MarkAqua]

I will get pics off my old phone of St Pauls. You wouldn't believe the boilers there lol

 

[MarkAqua]

a Manor House near Northaw, Potters Bar

 

[MarkAqua]

just some more. Hamworthy's are at Lambeth Palace.

 

[MarkAqua]

just realised they're on stupid angles. Sorry.

 

[josh]

Good pics mark, i do like geeking out at plant room pics

 

[Ermintrude]

Nice and tidy, gully terminations were a bit of a letdown as was height below headder. Your installs or servicing them?

 

[IDCHAPPY]

I'd give a testicle to do some proper commercial work again 🙁

 

[Ermintrude]

I would give both of yours

 

[MarkAqua]

I'm installing again now. Serviced and did breakdowns for a few years, but got bored.

 

[CES]

[video=youtube_share;afeg4FyZkXY]http://youtu.be/afeg4FyZkXY [/video]
Dunno if this will work, found this on my phone from a while back

 

[Whyme]

Told me off " This video is private"...Paah

 

[missplumb]

me too, Guess it doesnt like plumbers!!!

 

[Gray0689]

Now you got an expensive wet concrete slab lol
Nice work simon