What we all working on this week ? | UK Plumbers Forums | Page 29 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss What we all working on this week ? in the UK Plumbers Forums area at Plumbers Forums

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,156
I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop
 

Attachments

  • Screenshot_20191031-033038.png
    Screenshot_20191031-033038.png
    400.3 KB · Views: 277
  • Screenshot_20191031-033046.png
    Screenshot_20191031-033046.png
    420 KB · Views: 125
  • Like
Reactions: Dan
Bet that’s going to be fun siliconing it :D glad it’s you
 
They're on sheets, about 7" x 10". I'm using mapei flexi rapid set, white and mapei white grout right around. In the wetroom bit I'm using an epoxy grout which is recommended by the former manufacturer.

you ever used epoxy grout before ?
 
No, I've used 2 part grout before. What looked like normal grout with a latex additive.

I hear it’s a pita to work with and you need hot water and scouring pads to clean it off best having a word on the tilers forum for tips
 
Got a few more cut and stuck down ready for next week as i am having a day off a tomorrow. Regards Kop

A day off, I wish, enjoy.

Looks like a bit of SAS this week. Saturday and Sunday.

Starting another wet room monday. Have to finish this one. Got an outside tap to do before builders start on Monday up the road. An unvented cylinder to remove. Toilet to fix and a couple of oil boilers to service.

I will get to my 4 day working week next year.
 
A day off, I wish, enjoy.

Looks like a bit of SAS this week. Saturday and Sunday.

Starting another wet room monday. Have to finish this one. Got an outside tap to do before builders start on Monday up the road. An unvented cylinder to remove. Toilet to fix and a couple of oil boilers to service.

I will get to my 4 day working week next year.

A Bit busy then 😁, think of the money though.
 
My first solo UFH job.
Homeowner was project managing/self building, had the screed booked for the next day but hadn’t finished the block and beam flooring :mad:
View attachment 46249
Ive been there mate watch thats spacing and i always put plastic conduit on the last few meters to the manifold to help avoid overheating in that area good luck bud . Kop
 
Ive been there mate watch thats spacing and i always put plastic conduit on the last few meters to the manifold to help avoid overheating in that area good luck bud . Kop
Thanks for the tip. Was a bit of a nightmare job as there were no clear kitchen plans, materials in the way and floor not ready.
Everything was supplied for me on this job but I will make sure I have conduit next time.
 

Similar plumbing topics

  • Question
Very hard to follow your post Tina. What...
Replies
18
Views
4K
  • Question
Yes, The size of the external expansion...
Replies
17
Views
10K
No, I believe you absolutely. My own problem...
Replies
9
Views
306
  • Question
The customer had a Mira Sport they had bought...
Replies
14
Views
305
    • Like
  • Locked
Have another guy working for me but on this...
2
Replies
25
Views
5K
Back
Top