Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Gas Engineers Forum - This is a PUBLIC Gas Engineers Advice Forum..
Normal Threads
- Locked
2 x anton gas sniffers
£45.00 each including postage
- Locked
Hi Guys,
I thought you might like to know the going's on in NZ. I am ex British Gas, and I...
- BadgerNZ
- 6
- 2K
- Latest:
- ShaunCorbs
- Locked
Fitted quite a few budget makes of cookers recently and noticed the cooker burners not as stable...
- Locked
hi
i have gas registered recently and i did gas safety check for hobs but there was hob plate...
- Locked
We are an established Worcester Bosch Accredited installer that are expanding into the East...
- Locked
I've replaced the old gas valve on the above for the new sit valve. The boiler was firing on on...
- Locked
Hi, Got a job to do installing a combi boiler, Gas supply pipe is in a cupboard in the kitchen...
- Matt06
- 6
- 134
- Latest:
- Matt06
- Locked
I have done a load of cp12 this year and have come across ilfe fires that i have had to cap due...
- Hobo128
- 9
- 4K
- Latest:
- GrahamM
- Locked
Hi all, I have another post about servicing a fire on the forum but can't seem to move it to the...
- Locked
Hi all. I don't normally deal with fires but one of the inlaws just called saying that the fire...
- Locked
i know the answer is obviously that you should always report any bad/dangerous gas work but with...
- plumben
- 5
- 149
- Latest:
- plumben
- Locked
HI EVERYONE,
MY BRO IN LAW RECOMMENDED THE VIPER GAS BOOK FOR ME AND IM FINDING IT HARD TO GET...
- Locked
As above I've finally bitten the bullet and going to do the gas side of the job. Of course I've...
- JCSPLUMBING
- 1
- 69
- Latest:
- rocketmanbkk
- Locked
We at Heatwiz Plumbing and Heating, are a Woodford Green based, family run business. We have...
-
- Locked
Had a guy call me on Saturday saying he had fitted his own intergas boiler and would I check and...
- Locked
Morning,
My gas safe card has expired although i'm still listed on the GS register. My boss...
- Locked
Has anyone else had problems with these cylinders leaking. I've had 2 recently used once taken...
- Locked
Hi all,
Having started on the screwfix website and noted that many of the gas discussions were...
- Locked
hey all,
I'm just ticking off the boxes in my completed tasks folder for my ACS and for some...
- Locked
I know that I should remember all this stuff but at the moment I kinda need a refresher if...
- Robert Tyrrell
- 12
- 341
- Latest:
- Simon F
- Locked
I have been asked to do a LL gas safety check on a house that has a boiler and gas tumble dryer...
- Scott_D
- 5
- 115
- Latest:
- ShaunCorbs
- Locked
Hi all,
I've browsed these forums for a while and have now finally decided to begin...
- Dan-HybridHeat
- 16
- 2K
- Latest:
- Rich8
- Locked
Hello all
I am hoping someone might be able to offer me some advice regarding my faulty UP2...
- reflectingme
- 16
- 16K
- Latest:
- Robert Tyrrell
- Locked
Hi everyone,
I'm looking to expand my business. I have a position for a GSR plumber in the...
- Locked
I have an interview for the above job.
Does anyone know:
The wages!
Anyone doing it - are they...
- Locked
We have been asked to replace this fire. Does anyone have any idea on the make and model or...
- Locked
hi all what's everybody's thoughts on the tpi 709r flue gas analyser always used anton before
- Mike_gally21
- 3
- 1K
- Latest:
- Best
- Locked
Worked for a nice old dear today. She tells me she had her new combi and central heating system...
- Locked
Just a quick question re this fire I was called out to have a look at.
The customer has the...
- Allgoode
- 7
- 265
- Latest:
- Allgoode
- Locked
Hi went to a gazco room sealed gas fire. Looks like a standard stove flue goes into chimney...
New Threads
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 0
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0